20/40/48W Compressed FAC Laser Engraver Module Kit for CNC/ Ender 3/3 Pro/3 V2

From
Compatible

 

Q & A

Q1:Any grade of stainless steel?
A1:Suitable for 304, 301, 201 and other mirror surfaces, as well as non-mirror, surfaces stainless steel metal.


Q2:When you cut wood is it in multiple passes?
A1:For plywood, a cut 4-5mm thickness, multiple cuts can reach a maximum thickness of 8mm. cutting for the focus position has certain requirements, you need to set the focus position in the center of the cutting material thickness position, which can better achieve the cutting effect, while the material of the board will also have some influence on the cutting effect. You can learn more about the cutting material parameters through the bottom of the page.

 

Q3:Will the laser be compatible with the OpenBuilds controller and power supply?
A3:Yes, our laser head comes with an independent driver board, external 12-24V voltage, PMW0-3.3V or 0-5V control signal can meet the control of the laser head. Compatible board 32bit or 16bit.

Our 5W laser module is perfect for corporate remainder enthusiasts, artists, small manufacturers, and anyone looking for an affordable way to create custom designs on a variety of materials.


Not only can you use the laser module to engrave patterns, but you can even make your own home furnishings for the cost of just one additional Creality printer. The 5W module is only compatible with the Ender-3/Ender-3 Pro/Ender-3 V2 and Ender-5/5 Pro.


This laser kit can cut wooden boards up to 4 mm (1/6 inch) thick but is primarily used for etching. If you are a hobbyist or professional making miniatures, toy house furniture, architectural models, polished 3D printed models, custom etchings, and similar items, then the laser cutter is perfect for your needs.

Fixed Focus: The fixed focus distance is 20mm. compared to the adjustable laser module, it concentrates the energy of the light into a smaller spot. so you can cut and engrave effectively. At the same power, the fixed focus laser module can cut 4 mm linden wood at a time, which is not possible with the current adjustable laser module.

As you know, it is very important to set the right focus range for your laser. If you are in focus, then you can cut and engrave effectively, if not, then you will face some engraving and cutting problems. A fixed focus laser module might be a perfect finisher.

The laser module is designed specifically to be easy to assemble. With our included kit, you can quickly and easily assemble it in less than 10 minutes.

Our fixed focus laser module can work continuously for 12 hours without light decay. The recess on the module, built-in metal heat sink as well as cooling fan ensures the machine works properly, which also effectively extends its service life up to 10,000-20,000 hours.

 

BUY>>Turning-etched carver

Engraving Module: 40W,5W Output Power (Compressed spot)
Compatible with Laser Master,Ender 3 Series, CNC/Laser Engraving Machines)
Speed of the Fan: 10000RPM
Weight: 202 g
Focus Spot Size: 0.08 X 0.08 mm
PWM Input: 0-5V
Interface: XH2.54 2PIN
Drive Design: Built-in
Number of diodes:1
Dot Pitch: 0.075 mm
Best Carving & Depth: Max < 8 mm
Wave Length: 450 nm
Light Source: LD+FAC

 

Download firmware & Slicing Software at Google Drive

 

 

NOTE: Inkscape and workshop software is only available for 3D printers.

 


Specifications
Product Weight
540g
Product Gross Weight
240g
Slicing Software
CrealityWorkshop、Inkscape 
Laser Color
Blue
Laser Power
5W
Electric Power 40W
Wavelength
445±5nm
Input Voltage
24V
Focal Length
20mm
Spot Diameter
0.08mm
Working Temperature
0-60
Support Windows

 

Laser head engraving and cutting material test verification (Note: all one-time cutting)
Materials/Power 500mW 5W Note
1MM basswood board Engraving Engraving/cutting
3MM basswood board Engraving Engraving/cutting
4MM basswood board Engraving Engraving/Cutting
Solid wood Engraving Engraving
Bamboo  Engraving Engraving
Cardboard Engraving/cutting Engraving/Cutting
Leather (dark) Engraving Engraving/Cutting
Fabric (dark) Engraving Engraving/Cutting
3MM dark acrylic Engraving Engraving For transparent or translucent surface need to paste kraft paper film before engraving
Glass Engraving Engraving 500mW surface needs to be coated with engraving color paper, 5W surface needs to be coated with engraving color paper or painted black
Ceramic × Engraving The surface needs to be painted black
Stainless steel × Engraving Special stainless steel surface with strong reflection is recommended to be painted black
Anodized metal Engraving Engraving
Plated metal Engraving Engraving
Reflective materials (e.g. mirror glass) × × Dangers

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

sottoscrivi