P.S: The 10W laser head is not compatible with CR series.

Q & A

Q1:Any grade of stainless steel?
A1:Suitable for 304, 301, 201 and other mirror surfaces, as well as non-mirror, surfaces stainless steel metal.

Q2:When you cut wood is it in multiple passes?
A1:For plywood, a cut 3-4mm thickness, multiple cuts can reach a maximum thickness of 8mm. cutting for the focus position has certain requirements, you need to set the focus position in the center of the cutting material thickness position, which can better achieve the cutting effect, while the material of the board will also have some influence on the cutting effect. You can learn more about the cutting material parameters through the bottom of the page.

Q3:Will the laser be compatible with the OpenBuilds controller and power supply?
A3:Yes, our laser head comes with an independent driver board, external 12-24V voltage, PMW0-3.3V or 0-5V control signal can meet the control of the laser head. Compatible board 32bit or 16bit.

Our 5W laser module is perfect for corporate remainder enthusiasts, artists, small manufacturers, and anyone looking for an affordable way to create custom designs on a variety of materials.

Not only can you use the laser module to engrave patterns, but you can even make your own home furnishings for the cost of just one additional Creality printer. The 1.6W/5W module is only compatible with the Ender-3/Ender-3 Pro/Ender-3 V2 and Ender-5/5 Pro.

This laser kit can cut wooden boards up to 4 mm (1/6 inch) thick but is primarily used for etching. If you are a hobbyist or professional making miniatures, toy house furniture, architectural models, polished 3D printed models, custom etchings, and similar items, then the laser cutter is perfect for your needs.

Fixed Focus: The fixed focus distance is 20mm. compared to the adjustable laser module, it concentrates the energy of the light into a smaller spot. so you can cut and engrave effectively. At the same power, the fixed focus laser module can cut 4 mm linden wood at a time, which is not possible with the current adjustable laser module.

As you know, it is very important to set the right focus range for your laser. If you are in focus, then you can cut and engrave effectively, if not, then you will face some engraving and cutting problems. A fixed focus laser module might be a perfect finisher.

The laser module is designed specifically to be easy to assemble. With our included kit, you can quickly and easily assemble it in less than 10 minutes.

Our fixed focus laser module can work continuously for 12 hours without light decay. The recess on the module, built-in metal heat sink as well as cooling fan ensures the machine works properly, which also effectively extends its service life up to 10,000-20,000 hours.

BUY>>Turning-etched carver