Panel láser de Honeycomb con placa de aluminio COMGROW para la máquina de cortador de grabador

Tamaño
de

Plato de corte de panal

La placa de corte de peine de miel láser es imprescindible para cualquier persona que posea una máquina de grabado y grabado láser. El tamaño de la cama de trabajo es 400*400*22 mm (15.75*15.75*0.87 pulgadas)/600*590*22 mm (23.6*23.2*0.87 pulg.)Para D1, Ortur, Sculpfun,Neje, CV-01, D1, D1 Pro, Atomstack, etc.
Ayuda a reducir el daño de humo debajo de una tabla cuando se corta el láser.

Nuestras camas de panal láser están bien protegidas contra el daño a la encimera. Se coloca una alfombra de acero inoxidable debajo del marco de panal para proteger la superficie de la mesa del haz láser. Permite cortes limpios muy agradables con acrílico de madera, plástico, etc.

Es compatible con casi todos los grabadores láser de diodos comunes y máquinas de grabado con láser CO2 en el mercado.


Customer Reviews

Based on 9 reviews
100%
(9)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
James Dixon
Works well but I wish I had bought the larger size

Both it and the engraver were 400x400 but I'm new at this. If I had bought the 600x600 then the engraver would sit on the honey pad. As it is, the pad has to be moved around and I've raised the engraver so that the honeycomb pad can be moved to where it needs to go.

L
Leslie Davis
Honeycomb laser panel

I just really like it!

J
James Henderson
Honeycomb laser panel

It is the best if you have a laser you need one of these so you don't burn up the board the laser sitting on I love this it works very well...

E
Eloy B
Great but needs a few changes

Would I recommend it, ABSOLUTELY! Price and features are above average.

Its a magnetic, 8mm spaced bed. So you will be able to use magnetic holders to secure you work as well as the push-in pins that insert into the holes. Just be sure those pins you buy or make are scaled to fit the 8mm holes.

It includes a metallic sheet that goes underneath to protect your waste board from being marked while engraving. However, the bed sits directly on the metal sheet and does not allow for airflow unless you put some separators between the sheet and the bed yourself. I used some MDF scrap square in the corners until I 3D printed legs

Also there is a frame around the edge of the bed so you don't actually have a 400x400 Honeycomb bed its more like 360x360.

Also, the frame sticks up a bit (they all do, though) so if you have the Z1 5W for example and are engraving thin material like Paper or Cardboard, the module may hit the frame during homing.

D
Dennis Calleja
Honeycomb Laser Panel

Excellent quality and product. Highly recommended.

Suscríbase a

Over $99 Save 10% Disconut——Add to Cart