Comgrow Creality CR-10S Pro V2 3D-Drucker

I bought this recently on Comgrows' website and my first impressions of the Cr10S Pro V2 were alright. It wasn't a "pull out of the box and It works" type of situation but was more of a "pull out of the box and work on it for 7 hours", but I should've expected that so be prepared to level the printer and double-check the extruder/hot-end. Also, check your beds once you get them because the bed I got was slightly warped, but I still managed to level everything along with the help of different youtube videos on how to properly set it up. If you read up on this product beforehand, then it should be no problem and would recommend it to any beginner who wants to get into 3D printing.

Not my first printer but this one is worlds away from what I’d used before. Easy to put together (6 bolts) and with a little bit of setup, I was printing really quickly.
Prints since have been pretty consistent and the few failures have been down to me rather than the printer. A quick tweak of the settings (really easy to get to with the touchscreen) and it was all great.

Printer arrived as scheduled and was easy to assemble. Once adjusted and configured the initial prints were excellent. It's worth getting a magnetic bed for the CR-10 as getting things off the glass bed is hard! Oh, and if you've got an enclosed space into which you're putting the CR-10, the height that you're given for the printer does not include the height of the device with a filament spool on it! You need to add an additional 30cm to the height to take this into account.

These are minor grumbles - it's a well-built machine that works well right out of the box.